P25 + Analog

Eclipse2

ZOOM

Software Defined Radio for P25 and Analog
Icom America Systems is pleased to partner with RF Technologies, a radio company with a long, reliable history in public safety radio and well-versed in everything P25. The Eclipse2 offers the latest P25 has to offer, matches it with impressive analog performance, and does it all with a broad coverage range. Eclipse2 offers an affordable, real-world solution to today’s radio interoperability needs.

ZOOM
Open

IP Commander Software

IP Commander offers drag and drop editing, allowing for an intuitive end user experience. By clicking the apply button the features are enabled. Configurations can be saved to a file so that standard configurations can be easily programmed or sent to remote offices to ensure standardization. Flexible channel program enables multiple profiles to be stored and recalled by scrolling down the list. The trace menu allows capture of base station activity in text form which can be forwarded to RFT for advance diagnostics.

Other Features

  • TIA APCO P25 AFSI/DFSI compliant
  • Snmp and syslog functionality
  • P25 advanced conventional
  • Software upgradeable
  • Analog and P25 auto detect
  • Field proven robust hardware
  • Full duplex base station or repeater
  • Local voice reporting
  • Individual channel profiles
  • Smart signal and noise detection
  • Self calibration in real time
  • External reference input for simulcast/paging
  • Front panel mounted USB programming socket
  • Flash firmware upgrade capable
  • Remote IP firmware rollback safeguard facility
  • Remote alarm logging using RFC 3164 protocol
  • Broadband high efficiency LDMOS PA module
  • RX and TX switching BW covers full sub band
  • Cross band capabilities
  • Low RFI and EMI emission design
  • Low current consumption with full operating system
  • Latest technology, full SMD
  • Advanced and optimized RF design
  • Fast and simple disassembly for service
  • Virtual elimination of internal wiring

General

Receiver &Exciter Pwr Amp PA 501 SMPS-12 PS-12
Weight 1.45 Kg 3.55 Kg 4.65 Kg 2.6 Kg 8.0 Kg
Dimensions
(Width) 2UW=62 mm
(2 7⁄16 in.)		 2UW 3UW 5UW 2UW 4UW

Mounting Rack

4U high 19 inch 4.55 Kg

Blank Front Panel    

 Available in I UW, 3UW, 4UW width
Power +13.8 Vdc or 120/240 volt, 50/60 Hz ac with SMPS12 power supply or PS12 power supply
Channel Capacity     256 channels BCD coded 0-255

Tone Squelch

 Fully programmable, one EIA Tone per channel
Programming     Windows® or Linux, through serial port, USB or Ethernet

Software

IP Commander

Test and Diagnostics

 Front panel test connector USB via Ethernet and ALM, SQ, TX and PWR LEDs
Audio Response     Selectable flat or 750uSec pre/de - emphasis
Audio Interface     Standard 600 Ohm 0dBm balanced and Hi- Z unbalanced

Exciters / Transmitters

Frequency spread     Full band (Series 150), 10 MHz (Series 500)
Frequency stability     ±1 ppm
Power output adjustable     0.5 to 5 Watt
Power regulation     ± 10% from 12-16 Vdc, 0 to 50 deg C. all channels
Duty cycle 100% to 40 deg C. temp -30 to +60 C
Carrier and Modulation
Attack time    		 20 mSec
 
Spurious and harmonics Less than -36dBm (0.25 uW)
Audio response     +1 to -3 dB 300 to 3000 Hz
Audio distortion     Less than 3% at 60% system deviation at 1KHz
Residual Hum and Noise
relative to 60% system deviation		 Less than -50dB
 
Audio input level     600 Ohm line, -30 to +10 dBm Hi -Z input, 25 mV to 1 Vms Subtone input compatible with receivers Test microphone, 6 mV ms at 200 Ohms
Remote Keying DC Opto-coupled Input
Exteranl Ref. option Allows the transmitter to be phase locked to an external 1 MHz reference
Diagnotics VCO unlock, tuning voltage, signal strength, external mute, alarms and supply voltage via password protected via IP Commander software

Receivers

Frequency stability 1 ppm standard (TCXO) temp -30 to +60C
Frequency spread for 1dB degradation 38 MHz(Series 150) 10 MHz (Series 500)
Sensitivity     0.25μV (119 dBm) for 12 dB Sinad, 0.35 μV (-119 dBm) for 20 dB Quieting
Spurious and image Rejection 90 dB
Selectivity     80 dB at 25 KHz spacing per RS -204 -C, 75 dB at 12.5 KHz spacing
Intermodulation     80 dB per RS -204-C
Modulation acceptance     7.5 and 3.75 KHz
Squelch     software adjustable from 6 to 26 dB Sinad Carrier squelch, adjustable from 1 to 200 μV
Audio response     +1 to 3 dB 300 to 3000 Hz
Audio level     600 Ohm line adjustable from -10 to +10 dBm Monitor output, 3 watts at 4 Ohms Discriminator and subtone output 1 V peak at 100% system deviation
Audio distortion     Less than 3% at 1KHz, 60% system deviation with 750 uSec de-emphasis
COS output     Opto-coupled + 12V, GND and free switch connections
Diagnostics VCO Unclock, tuning voltage, signal strength, external mute, alarms and supply voltage via password protected via IP Commander software
Power Amplifier PA70 PA150 PA500 PA501
Output power (adjustable) 25 to 70 watts 25 to 60 or
50 to 100 watts		 25 to 60 watts 50 to 100 watts
Input power (typical) o/p 7 watts at 50 W o/p,
20 watts at 100 W o/p		 10 watts at 50 W o/p 12 watts at 100 W o/p
Duty cycle 100% 50W - 100%
100W - 100%
with optional fan		 50W - 100% 100W - 100%
with in-built fan
Protection Automatic power reduction with high VSWR and temperature
Spurious and harmonics Less than 0.25μV
DC Power Consumption (DC Amps)
TRX Model Standby (RX active) Full power RX/TX active 100%
TRX150 0.5 2 0.66
R500 0.53 2 0.68
50 Watt PA 100 Watt PA
Tx Model Idle 35W 50W 50W 75W 100W
T150 0.3 5.0 6.2 10.0 12.0 14.4
T500 0.2 4.4 4.8 12.0 15.0 17.6
Protection Note: For a repeater or base station Add TRX and PA currents for a total figure
SMPS12-2
(13.8V 35 Amps		 Idle Tx ON PA ON
Switch Mode Rx Rx/Tx Rx/Tx/PA 15W 25W 50W 100W
0.15 0.18 0.21 0.21 0.67 0.58 1.22 2.14
PS12
(13.8 V 20 Amps)		 Idle Tx ON PA ON
Linear Rx Rx/Tx Rx/Tx/PA 15W 25W 50W 100W
0.021 0.08 0.11 0.11 0.67 0.75 1.37 2.35

Catalogs / Brochures

Brochures Name Size
Eclipse2 1.81MB