P25 + Analog
Eclipse2
Software Defined Radio for P25 and Analog
Icom America Systems is pleased to partner with RF Technologies, a radio company with a long, reliable history in public safety radio and well-versed in everything P25. The Eclipse2 offers the latest P25 has to offer, matches it with impressive analog performance, and does it all with a broad coverage range. Eclipse2 offers an affordable, real-world solution to today’s radio interoperability needs.
General
| Receiver &Exciter | Pwr Amp | PA 501 | SMPS-12 | PS-12 | |
|---|---|---|---|---|---|
| Weight | 1.45 Kg | 3.55 Kg | 4.65 Kg | 2.6 Kg | 8.0 Kg |
| Dimensions (Width) 2UW=62 mm (2 7⁄16 in.) |
2UW | 3UW | 5UW | 2UW | 4UW |
|
Mounting Rack |
4U high 19 inch 4.55 Kg |
||||
|
Blank Front Panel |
Available in I UW, 3UW, 4UW width | ||||
| Power | +13.8 Vdc or 120/240 volt, 50/60 Hz ac with SMPS12 power supply or PS12 power supply | ||||
| Channel Capacity | 256 channels BCD coded 0-255 | ||||
|
Tone Squelch |
Fully programmable, one EIA Tone per channel | ||||
| Programming | Windows® or Linux, through serial port, USB or Ethernet | ||||
|
Software |
IP Commander |
||||
|
Test and Diagnostics |
Front panel test connector USB via Ethernet and ALM, SQ, TX and PWR LEDs | ||||
| Audio Response | Selectable flat or 750uSec pre/de - emphasis | ||||
| Audio Interface | Standard 600 Ohm 0dBm balanced and Hi- Z unbalanced | ||||
Exciters / Transmitters
| Frequency spread | Full band (Series 150), 10 MHz (Series 500) |
|---|---|
| Frequency stability | ±1 ppm |
| Power output adjustable | 0.5 to 5 Watt |
| Power regulation | ± 10% from 12-16 Vdc, 0 to 50 deg C. all channels |
| Duty cycle | 100% to 40 deg C. temp -30 to +60 C |
| Carrier and Modulation Attack time |
20 mSec |
| Spurious and harmonics | Less than -36dBm (0.25 uW) |
| Audio response | +1 to -3 dB 300 to 3000 Hz |
| Audio distortion | Less than 3% at 60% system deviation at 1KHz |
| Residual Hum and Noise relative to 60% system deviation |
Less than -50dB |
| Audio input level | 600 Ohm line, -30 to +10 dBm Hi -Z input, 25 mV to 1 Vms Subtone input compatible with receivers Test microphone, 6 mV ms at 200 Ohms |
| Remote Keying | DC Opto-coupled Input |
| Exteranl Ref. option | Allows the transmitter to be phase locked to an external 1 MHz reference |
| Diagnotics | VCO unlock, tuning voltage, signal strength, external mute, alarms and supply voltage via password protected via IP Commander software |
Receivers
| Frequency stability | 1 ppm standard (TCXO) temp -30 to +60C |
|---|---|
| Frequency spread for 1dB degradation | 38 MHz(Series 150) 10 MHz (Series 500) |
| Sensitivity | 0.25μV (119 dBm) for 12 dB Sinad, 0.35 μV (-119 dBm) for 20 dB Quieting |
| Spurious and image | Rejection 90 dB |
| Selectivity | 80 dB at 25 KHz spacing per RS -204 -C, 75 dB at 12.5 KHz spacing |
| Intermodulation | 80 dB per RS -204-C |
| Modulation acceptance | 7.5 and 3.75 KHz |
| Squelch | software adjustable from 6 to 26 dB Sinad Carrier squelch, adjustable from 1 to 200 μV |
| Audio response | +1 to 3 dB 300 to 3000 Hz |
| Audio level | 600 Ohm line adjustable from -10 to +10 dBm Monitor output, 3 watts at 4 Ohms Discriminator and subtone output 1 V peak at 100% system deviation |
| Audio distortion | Less than 3% at 1KHz, 60% system deviation with 750 uSec de-emphasis |
| COS output | Opto-coupled + 12V, GND and free switch connections |
| Diagnostics | VCO Unclock, tuning voltage, signal strength, external mute, alarms and supply voltage via password protected via IP Commander software |
| Power Amplifier | PA70 | PA150 | PA500 | PA501 |
|---|---|---|---|---|
| Output power (adjustable) | 25 to 70 watts | 25 to 60 or 50 to 100 watts |
25 to 60 watts | 50 to 100 watts |
| Input power (typical) | o/p | 7 watts at 50 W o/p, 20 watts at 100 W o/p |
10 watts at 50 W o/p | 12 watts at 100 W o/p |
| Duty cycle | 100% | 50W - 100% 100W - 100% with optional fan |
50W - 100% | 100W - 100% with in-built fan |
| Protection | Automatic power reduction with high VSWR and temperature | |||
| Spurious and harmonics | Less than 0.25μV | |||
| DC Power Consumption (DC Amps) | |||
|---|---|---|---|
| TRX Model | Standby (RX active) | Full power RX/TX active | 100% |
| TRX150 | 0.5 | 2 | 0.66 |
| R500 | 0.53 | 2 | 0.68 |
| 50 Watt PA | 100 Watt PA | |||||
|---|---|---|---|---|---|---|
| Tx Model | Idle | 35W | 50W | 50W | 75W | 100W |
| T150 | 0.3 | 5.0 | 6.2 | 10.0 | 12.0 | 14.4 |
| T500 | 0.2 | 4.4 | 4.8 | 12.0 | 15.0 | 17.6 |
| Protection | Note: For a repeater or base station Add TRX and PA currents for a total figure | |||||
| SMPS12-2 (13.8V 35 Amps |
Idle | Tx ON | PA ON | ||||
|---|---|---|---|---|---|---|---|
| Switch Mode | Rx | Rx/Tx | Rx/Tx/PA | 15W | 25W | 50W | 100W |
| 0.15 | 0.18 | 0.21 | 0.21 | 0.67 | 0.58 | 1.22 | 2.14 |
| PS12 (13.8 V 20 Amps) |
Idle | Tx ON | PA ON | ||||
| Linear | Rx | Rx/Tx | Rx/Tx/PA | 15W | 25W | 50W | 100W |
| 0.021 | 0.08 | 0.11 | 0.11 | 0.67 | 0.75 | 1.37 | 2.35 |
Close