Firmware Download

Download the old version

Download Type Firmware
Model name IC-PW2
Version Version 1.10
Update Aug.20.2024
Major changes
  • Changes from Version 1.03
    • Added a setting item to turn ON/OFF the IC-PW2 by the exciter's power key operation when connecting to an Icom exciter.

Refer to INFORMATION IC-PW2 Version 1.10 for details.

Note
  • To update the firmware
  • 1. Download and unzip the firmware data (for example, PW2_110.dat) and copy it into the “IC-PW2” folder that is on your SD card.
  • 2. Insert the SD card with the firmware data into the linear amplifier.
  • 3. Update the firmware.
  • 3-1. Display the SD CARD screen in the Menu.
  • 3-2. Touch “Firmware Update” on the SD CARD screen to open the FIRMWARE UPDATE screen.
  • 3-3. Touch [▼] to scroll to the end of the screen to read all the precautions, after you read and agree with all the precautions, touch [YES].
  • 3-4. The confirmation dialog recommends making a backup of the settings and memories, touch [YES].
  •  We recommend that you make a backup of them in this step, because all the settings and memories may be reset after updating the firmware.
  • 3-5. After the backup file is made, and the firmware selection screen is displayed, touch the firmware update data (for example, PW2_110).
  • 3-6. Please carefully read all the precautions, and when you want to execute it, touch [Yes] for 1 second to start the firmware update.
  • 3-7. When the update is completed, "Firmware updating has completed.” is displayed, and the linear amplifier will automatically restart.
  • If the setting data needs to be converted, it may take some time to restart.
  • 4. If the settings and memories have been reset, load the settings and memories that have been backed up onto the SD card.
  • 4-1. Display the SD CARD screen in the Menu.
  • 4-2. Touch “Load Setting” on the SD CARD screen to open the LOAD SETTING screen.
  • 4-3. Touch the file name of the saved file.
  • 4-4. Touch “ALL,” and then the dialog "Load file? The new “ALC Adjust” setting will be saved.” is displayed, touch [Yes].
  • 4-5. After the loading ends, “COMPLETED! Restart the IC-PW2.” is displayed, restart the linear amplifier.

  • After updating the firmware, the Version Information in the OTHERS Set will be as follows.
  • Main CPU: 1.10
  • Front CPU: 1.10
File Size 5.62MB
File Type zip
Manual manual download page
Document

Firmware Update Information

Regarding this Download Service.

When using this download service, the implementation, use and/or results of use are the sole responsibility of you using this download service and the equipment. You shall comply with applicable laws and regulatory requirements in the use of this download service and in the operation of the equipment.

Firmware is important data for the basic system control of your equipment. An interruption during downloading or a malfunction may cause a failure in the data re-writing, and your equipment may stop functioning normally. If such a failure of the firmware re-writing results in your equipment not functioning normally, Icom Inc. and its affiliates expressly denies and is free from any and all responsibility arising from the result of damage from such an event.

You agree not to hold Icom Inc. and its affiliates responsible for any damage to your equipment operation or loss of data, or unauthorized use of the equipment, whether intentional or not, as a result of use this download service.