WLAN Transceiver /WLAN Transceiver APP /WLAN Transceiver Controller
IP100H
IP100FS
IP1000C
Full-Duplex Communication That Works Over a Wireless LAN and IP Network*
WLAN Transceiver
IP100H
WLAN Transceiver APP
IP100FS
WLAN Transceiver Controller
IP1000C
Basic Functions
The IP100H IP communication terminal transmits voice and preprogrammed text messages to the IP1000C controller through the wireless LAN access points installed in the IP network (VPN). The controller redirects traffic to the specified terminals. The IP100FS WLAN transceiver app can create a virtual radio and simple dispatch station on a Windows® based PC. The IP100FS can obtain position information (based on using access points) and status information of each terminal.
Simultaneous TalkListen Function for Full-Duplex Communication
With an optional earphone-microphone (HM-153LS, or HM-166LS) or headset (HS-102 with OPC-2359), the Simultaneous TalkListen function provides full-duplex one-to-many communication which users can talk and receive at the same time like a telephone style conversation.
Calling Features
The IP100H/IP100FS can make Individual calls, Group conference calls, All calls and Area calls. The unique Area call function allows you to call any user who is accessing the specified access point.
Mixing Function
The mixing function receives multiple user's voices at the same time. One-to-many communication is possible and the efficiency of information sharing increases.
Seamless Roaming
If two or more wireless access points are deployed over an IP network, the IP100H can access the nearest access point and can roam between access points.
Status and Short Data Messaging
The IP100H/IP100FS can send status and short data messages* to other users.
* The IP100H can send only preprogrammed messages.
Scalable System
Deploying wireless access points over an IP network can expand the communication range. Dispersed sites can also be connected over an IP network (VPN). Range is only restricted by your IP network coverage.
High Security
The wireless LAN security protocols (WPA-PSK (TKIP/AES), WPA2-PSK (TKIP/AES)) encrypt your private conversations.
License-Free
Licensing and applications are not required for installation. IEEE 802.11 a/b/g/n standards are used.
Easy Maintenance
The IP1000C programs almost all terminal configurations over the air. Individual PC programming via cable connection is not required.
IP100H＜IP Communication Terminal＞
- IPX7 waterproof (1m depth water for 30 minutes) for outdoor work or places prone to get wet.
- Compact 58×95×26.4 mm body and 205g (approximate) lightweight.
- Vibration alert function for incoming calls.
- Emergency call with higher priority.
- Tested to the MIL-STD 810G specifications.
IP100FS＜WLAN Transceiver APP＞
- The IP100FS can communicate with IP communication terminals from a PC.
- The IP100FS can obtain location information of each IP100H based on the access point being used.
- Can be installed on a Windows® based tablet PC as well as a laptop PC.
IP1000C＜WLAN Transceiver Controller＞
- The IP1000C controls all terminal configurations and voice traffic.
- Capable of controlling up to 100 terminals (including IP100FSs).
- Links up to 11 IP1000Cs over an IP network (Internet VPN) and increases the number of usable IP100H/IP100FS communication terminals to 1100 units.
* Depending on the IP1000C version.
AP-95M＜Wireless Access Point＞
- IEEE 802.11 ac/n/a/g/b standard
- PoE (Power over Ethernet) capability
- Optional RS-AP3, Access point management software
IP Phone and Transceiver Interconnection
Interconnection image
The IP communication terminals, radios and telephones can communicate with each other within the doughnut shaped blue ring.
With a VE-PG4 RoIP gateway, the IP advanced radio system can interconnect with an IP phone, LTE, IDAS™ Conventional, Type-D multi-site trunking and analog transceivers.
The VE-PG4 has a built-in controller function (equivalent to the IP1000C function), capable of controlling up to 50 IP communication terminals.
IP100H＜IP Communication Terminal＞
| Wireless standards | IEEE 802.11 a/b/g/n |
|---|---|
| Frequency range*1 | 2.4–2.4835 GHz, 5.15–5.35, 5.47–5.85 GHz |
| Dimensions (W×H×D)*2 | 58×95×26.4mm (with BP-271) |
| Weight (approx.) | 205g (with BP-271 and antenna) |
| Operating time*3 | More than 20 hours (with BP-271) |
| HF output power | Less than 10mW/MHz |
| Voice Codec | G.711 μ-law (64kbps) |
| AF output power (10% distortion) |
Internal SP 400mW (typ., 16Ω), External SP 200mW (typ., 8Ω) |
| Security | WEP (64/128-bit), WPA-PSK (TKIP/AES), WPA2-PSK (TKIP/AES) |
| Operating temperature | −10°C to +60°C |
*1Authorized frequency range and channels may differ depending on country. *2 Projections are not included. *3 Tx: Rx: Stand-by=1 : 1 : 8 duty cycle
Supplied Accessories for IP100H
・BP-271 Li-Ion battery pack
・MB-127 belt clip
・Hand strap
・Antenna
・Antenna cap
IP100FS＜WLAN Transceiver APP＞（System requirements）
| Operating system | Windows® 10 (32-bit/64-bit), Windows® 8.1 (32-bit/64-bit) (Except for Windows® RT) |
|---|---|
| CPU | Intel® Core™ 2 Duo Processor E6600/2.4GHz or better |
| Memory | 2GB or higher |
| Hard disk space | 1GB of disk space (to save log files) |
| Audio | DirectSound compatible audio (Frequency response up to 20kHz, sampling rate 48kHz) |
| Display resolution | 1920×1080 pixel recommended 1024×768 pixel minimum |
| Other | USB 2.0 port, 10Mbps or faster Ethernet interface, speaker, microphone or headset |
IP1000C＜WLAN Transceiver Controller＞
| Power supply | 100-240V AC (With supplied AC adapter) |
|---|---|
| Operating temperature | 0°C to +40°C |
| Dimensions (W×H×D)*4 | 232×38×168mm |
| Weight (approx.) | 750g (Main unit only) |
| LAN | RJ-45 connector × 4 1000BASE-T/100BASE-TX/10BASE-T (Auto MDI/MDI-X) |
| USB | Standard A receptacles ×2 |
| Maintenance console |
RS-232C (RJ-11) connector |
*4 Projections are not included.
Supplied Accessories for IP1000C
・BC-207S AC adapter
・Cushion sheets
・Ferrite core
AP-95M＜Wireless Access Point＞
| Power supply | 12 V DC ±10% or PoE (IEEE802.3af compatible) |
|---|---|
| Dimensions (W×H×D)*5 | 162×162×42 mm; 6.4×6.4×1.7 in |
| Weight (approx.) | 520 g; 1.1 lb (Accessories not included) |
| Cable LAN | RJ-45 connector × 1 1000BASE-T/100BASE-TX/10BASE-T (MDI/MDI-X automatic distinction) |
| Wireless LAN | IEEE 802.11 a/b/g/n/ac |
| Frequency range*6 | 2.4–2.4835 GHz, 5.15–5.35, 5.47–5.85 GHz |
| Security | WEP (64/128/152-bit), WPA, WPA2, WPA-PSK, WPA2-PSK, IEEE 802.1X/EAP |
| Operating temperature | -10 °C to +55 °C; +14 °F to +131 °F |
*5 Projections are not included. *6 Authorized frequency range and channels may differ depending on country.
All stated specifications are subject to change without notice or obligation.
IP100H
AC ADAPTERS
CHARGERS
BATTERIES
MICROPHONES
HEADSETS
CARRYING CASES
BELT CLIPS
ADAPTER CABLES
OPC-2480
IP100FS
AC ADAPTERS
BC-147SA
EXTERNAL DEVICES
CT-23 PTT
MICROPHONES
IP1000C
PROGRAMMING/DATA CABLES
Catalogs / Brochures
| Brochures Name | Size |
|---|---|
| Professional Radios | 12.11MB |
| Marine Products | 6.48MB |
| IP100H/IP100FS/IP1000C (Letter size) | 2.90MB |
Instruction Manual / Guides
| Name | Model Name | Note |
|---|---|---|
| Instruction Manual | CS-IP100H | |
| Instruction Manual (Ver. 2.30) | IP1000C | |
| Precautions | IP1000C | |
| Connection Guide | IP1000C | |
| Instruction Manual | IP100FS | IP ADVANCED RADIO SYSTEM REMOTE COMMUNICATOR |
| Instruction Manual (Ver.2.20) | IP100H | |
| Guide(Ver.2.10) | IP100H |
Firmware / Software
| Type | Model Name | Version | Last Update |
|---|---|---|---|
| Cloning software | CS-IP100H | Version 2.05 | Nov.05.2021 |
| Firmware | IP1000C (100 terminal versions #11 and #12) | Version 2.33 | Jun.22.2021 |
| Firmware | IP1000C (20 terminal versions #13 and #14) | Version 2.33 | Jun.22.2021 |
| Software update | IP100FS | Version 2.03 | Jul.13.2020 |
Close