VHF/UHF DUAL BAND FM TRANSCEIVER

IC-T10

Rugged, Compact Dual Bander
with Simple Operation
and Great Performance

Designed with a high waterproof rating, the IC-T10 is a simple yet powerful dual-band handheld. It is ready for whatever field activities lie ahead. Clearly hear any transmission from other hams or the FM radio receiver with the loud 1500 mW speaker.

5W RF Output in 144 and 430 MHz

1500 mW Loud and Intelligible Audio

IP67 Dust-tight and Waterproof

Home Button on the Top Panel for Quick Access to Calling Channel

Optional HM-222HLWP, Loud Audio SP-MIC

FM Broadcast Receiver

Up to 11 Hours* Operating Time

* 11/10 hours (VHF/UHF, approx.) with BP-280 battery at 1:1:8 duty ratio (Power save ON)

Other Features

  • DC power operation with optional AD-149H
  • Free CS-T10 downloadable programming software
  • Built-in CTCSS/DTCS for repeater operation
  • Total of 208 memory channels with 6 character channel name
  • 16 DTMF autodial memories
  • Priority, Program, Memory, Skip, and Tone Scan
  • Direct-conversion system eliminates IF stages

General

IC-T10
Frequency coverage USA Version TX 144–148, 430–450 MHz*(* Working range)
RX 136–174, 400–479 MHz*(* Working range)
FM broadcast 88–108 MHz
Export Version TX 136–174, 400–479 MHz*(Working range)
RX 136–174, 400–479 MHz*(Working range)
FM broadcast 76–108 MHz
EUR Version TX 144–146, 430–440 MHz
RX 136–174, 400–479 MHz*3 (* Working range)
FM broadcast 76–108 MHz
Number of channels 208 channels (including 2 call and 6 scan edges)
Type of emission F2D, F3E (FM)
Frequency stability ±2.5 ppm (–20°C to +60°C on the basis of 25°C )
Power supply requirement
External DC power

7.2 V DC nominal

10–16 V DC (with AD-149H)

Current drain (approx.) Tx High Less than 2.5 A
Rx Max. audio Less than 600 mA
Antenna impedance 50 Ω (SMA)
Operating temperature range –20°C to +60°C
Dimensions
(W × H × D, Projections not included)
52.2 × 111.8 × 30.3 mm,  2.1 × 4.4 × 1.2 in (with BP-280)
Weight (Approximate) 278 g; 9.8 oz (with BP-280 and antenna)


*1 Guaranteed range 144–148, 440–450 MHz
*2 Guaranteed range 144–148, 430–440 MHz
*3 Guaranteed range 144–146, 430–440 MHz

Transmitter

IC-T10
Output power 5 W, 2.5 W, 0.5 W
Max. frequency deviation ±5.0 kHz/±2.5 kHz (W/N)
Spurious emissions

Less than –60 dBc (High, Mid),

Less than –13 dBm (Low)

Ext. microphone connector 3-conductor 2.5 (d) mm (1/10ʺ)/2.2 kΩ

RECEIVER

IC-T10
Receiver sensitivity Less than 0.18 μV (at 12 dB SINAD)
Squelch sensitivity Less than 0.18 μV (at squelch threshold)
Adjacent channel selectivity More than 55 dB (FM, 25 kHz)
More than 50 dB (FM Narrow, 12.5 kHz)
Spurious response More than 60 dB
Audio output power
(at 5% distortion, 8 Ω load)
Internal SP 1500 mW (typical)
External SP 450 mW (typical)
HM-222HLWP 1500 mW (typical)
Ext. speaker connector 3-conductor 3.5 (d) mm (1/8ʺ)/8 Ω


All stated specifications are subject to change without notice or obligation.

Applicable U.S. Military Specifications & IP Rating

Standard
 
MIL-810 G
Method Procedure
Low Pressure 500.5 I, II
High Temperature 501.5 I, II
Low Temperature 502.5 I, II
Temperature Shock 503.5 I-C
Solar Radiation 505.5 I
Rain Blowing/Drip 506.5 I, III
Humidity 507.5 II
Salt Fog 509.5
Dust Blowing 510.5 I
Immersion 512.5 I
Vibration 514.6 I
Shock 516.6 I, IV


Also meets equivalent MIL-STD-810-C, -D -E and -F.

Ingress Protection Standard
Dust & Water IP67 (Dust-tight and waterproof protection)

Supplied Accessories

  • BP-280 Battery Pack
  • FA-S270C Antenna
  • MB-133 Belt Clip
  • BC-213 Rapid Charger
  • AC Adapter (BC-242 or BC-123SA/SE)

Catalogs / Brochures

Brochures Name Size
IC-T10 6.24MB

Instruction Manual / Guides

Firmware / Software

Type Model Name Version Last Update
Programming software CS-T10 Version 1.00 Apr.05.2023