New 
VHF AND UHF DIGITAL TRANSCEIVERS

IC-F5330D
IC-F6330D

Space Saving, Flexible Installation
PoE Remote-Control Mobile Radio

VHF/IDAS DIGITAL

IC-F5330D

UHF/IDAS DIGITAL

IC-F6330D

The IC-F5330D/F6330D series offers a flexible and unique installation solution that allows the main unit (RF unit) and remote‑controller (PoE PD, Power over Ethernet Powered Device) to be connected using an Ethernet cable, and can be extended up to 100 m, 328 ft with an inexpensive Cat 5e LAN cable. The remote-controller uses a Commandmic™ with excellent operability and a high contrast black LCD.

Flexible Installation Using an Ethernet Cable Between the Main Unit and Commandmic™

Loud and Intelligible Audio Even in Noisy Environment

Input /Output Interface for External Devices with Optional D-SUB Accessory Cable

Dual Mode Operation – IDAS™ Digital Mode and Analogue FM Mode

400 – 520 MHz Wide Frequency Coverage (IC-F6330D UHF version)

General Features

  • 136–174, 400–520 MHz versions
  • 128 Channels / 8 Zones
  • Two-piece configuration – Commandmic™ + black box main unit
  • Commandmic™ is powered from the main unit through an Ethernet cable*
    * Extendable up to 100m, 328 ft. (Cat 5e LAN cable user supplied).
  • High contrast, wide viewing angle, black background display on the Commandmic™
  • 1700 mW (typical) audio output from the Commandmic™
  • MIL-STD-810 G shock, vibration, temperature and more
  • IPX4 water splash resistance for the Commandmic™
  • DTMF autodial memories capability

Operating Mode

  • NXDN™ conventional
  • NXDN™ Type-D single-site trunking
  • NXDN™ simulcast
  • NXDN™ multi-site conventional over IP network
  • Analogue mode

Digital Functions (Voice and Data)

  • PTT ID and ANI
  • Over-the-Air Alias (OAA) displays the caller’s name without programming
  • Individual, Group and All call
  • Late entry for Group call
  • Status call and Polling call
  • Short data messages
  • Call alert
  • Radio check (RX only)

Analogue Functions

  • CTCSS and DTCS tone
  • 2-Tone and 5-Tone
  • MDC functions; PTT ID, Emergency (TX/RX), Radio check (RX), Stun (RX), Revive (RX)
  • BIIS PTT ID transmission

Security and Safety

  • Digital voice scrambler
  • Emergency call and Lone worker
  • Remote monitor (RX)
  • Radio Kill, Stun and Revive (RX)

Scan Functions

  • Priority scan monitors one or two priority channels while scanning non-priority channels
  • Voting scan automatically selects the optimal repeater site

Hardware Features

Optional OPC-2078 installation image

  • Set an IP address for main unit and Commandmic™
  • GPS receiver connection with optional ACC cable
  • Optional D-SUB connector, OPC-2078/OPC-1939, for external PTT, channel, horn, ignition switch, and dimmer control, according to programming*
    * No digital modulation “IN” when using accessory cables.

Flexible Installation with a PoE Switch and IP Network

Using a PoE (Power over Ethernet) switch (as the power supply to the microphone) and an IP network, you can easily install the IC-F5330D series into a building*. In this installation scenario, you don’t have to worry about the distance between the main unit and the Commandmic™. Also, as the main (RF) unit can be installed close to the antenna, cable loss is kept to a minimum.
* In-building usage is not available in some countries.

Advanced System Example with VE-PG4

The VE-PG4 is a versatile RoIP (Radio over IP network) gateway unit, which interconnects the IC-F5330D series with other radio systems, even when the systems are using different bands*.

As shown in the example, any transmission from the “Radio System A” is bridged to other radio systems, so the radio user in the “Radio System A” can talk to all connected radio users in the figure.

* Cross band operation may be prohibited in some countries.
Please check the legal requirements in your country before installation.

General

IC-F5330D IC-F6330D
Frequency coverage 136–174 MHz 400–520 MHz
400–512 MHz
Number of channels 128 channels/8 zones
Type of emission USA 50 W/45 W 11K0F3E (15 kHz)/4K00F1E, F1D (7.5 kHz) 11K0F3E (12.5 kHz)/4K00F1E, F1D (6.25 kHz)
EXP 50 W/45 W 16K0F3E (25 kHz)/14K0F3E (20 kHz)/8K50F3E (12.5 kHz)/4K00F1E, F1D (6.25 kHz)
EXP 25 W 16K0F3E (25 kHz)/14K0F3E (20 kHz)/8K50F3E (12.5 kHz)/4K00F1E, F1D (6.25 kHz)
Power supply requirement USA, EXP 50 W/45 W 13.6 V DC nominal
EXP 25 W 13.2 V DC nominal
Current drain (approx.) Tx (High) 14 A Max. (50 W/45 W)
7 A Max. (25 W)
Rx (Max./Standby) 2.5 A Max./500 mA Max.
Antenna impedance USA, EXP 50 W/45 W 50 Ω (SO-239)
EXP 25 W 50 Ω (BNC)
Operating temperature range –30 °C to +60 °C, –22 °F to +140 °F
Dimensions (W×H×D)
(Projections not included)
Main unit: 150 × 45 × 161.8 mm, 5.9 × 1.8 × 6.4 in
Mic: 60.8 × 134.8 × 35.5 mm, 2.4 × 5.3 × 1.4 in
Weight (approx.) Main unit: 1.2 kg, 2.4 lb
Mic: 250 g, 8.8 oz

* 25 kHz bandwidth is no longer available for FCC Part 90 licensees for USA versions.

Transmitter

IC-F5330D IC-F6330D
Output power (rated) USA, EXP 50 W/45 W 50 W, 25 W, 5 W (Hi, L2, L1) 45 W, 25 W, 4.5 W (Hi, L2, L1)
EXP 25 W 25 W, 10 W, 5.8 W (Hi, L2, L1) 25 W, 10 W, 5.8 W (Hi, L2, L1)
Frequency stability ±1.0ppm
Spurious emissions USA, EXP 50 W/45 W 80 dB typ.
EXP 25 W

0.08 μW (typ.) (≤ 1 GHz)

0.03 μW (typ.) (> 1 GHz)

Audio harmonic distortion (AF 1 kHz 40% deviation) 0.6% typ.
FM Hum and Noise (without CCITT filter) 80/70 dB typ. (W/N) 76/70 dB typ. (W/N)
FSK error 1.4% typ.

Receiver

IC-F5330D IC-F6330D
Sensitivity Analog 12 dB SINAD
(USA, EXP 50/45 W)
0.25/0.22 μV (–119/–120 dBm) typ. (W/N) 0.22 μV (–120 dBm) typ. (W/N)
Analog 20 dB SINAD
(EXP 25 W)
–4.9/–4.5/–1.4 dBμV emf typ. (W/M/N) –5.0/–5.0/–2.0 dBμV emf typ. (W/M/N)
Digital 1% BER –4.0 dBμV emf typ. –5.0 dBμV emf typ.
Adjacent channel selectivity USA, EXP 50 W/45 W 83/58/73 dB typ. (W/N/D) 76/58/69 dB typ. (W/N/D)
EXP 25 W 83/83/79/73 dB typ. (W/M/N/D) 76/76/74/69 dB typ. (W/M/N/D)
Spurious response rejection 80 dB typ. 75 dB typ.
Intermodulation rejection Analog (USA, EXP 50/45 W)
(EXP 25 W)
76 dB typ.
69 dB typ.
74 dB typ.
69 dB typ.
Digital 74 dBμV emf typ. 74 dBμV emf typ.
Hum and noise 60/52 dB typ. (W/N) 55/52 dB typ. (W/N)
AF output power Internal SP
(Commandmic™)
1.7 W typ. (at 5% distortion, 8 Ω load)
External SP 4.2 W typ. (at 5% distortion, 4 Ω load)

Applicable U.S. Military Specifications

Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.

Standard
 
MIL-810 G
Method Procedure
Low Pressure 500.5 I, II
High Temperature 501.5 I, II
Low Temperature 502.5 I, II
Temperature Shock 503.5 I-C
Solar Radiation 505.5 I
Humidity 507.5 II
Vibration 514.6 I
Shock 516.6 I, IV

Also meets equivalent MIL STD 810 -C, -D, -E and -F.

All stated specifications are subject to change without notice or obligation.

Ingress Protection Standard
Water Resistance for Commandmic™ IPX4 (Water resistance)

Supplied Accessories

Catalogs / Brochures

Brochures Name Size
Professional Radios 12.11MB
IC-F5330D/IC-F6330D (LT) 573KB

Instruction Manual / Guides

Name Model Name Note
INSTRUCTIONS IC-F5330D/IC-F6330D
PRECAUTIONS (French) IC-F5330D/IC-F6330D