VHF AND UHF DIGITAL/ANALOG TRANSCEIVERS

IC-F5123D
IC-F6123D

Everything you'd expect in a business radio
... Plus Digital!

VHF/IDAS DIGITAL

IC-F5123D(50W/25W)

UHF/IDAS DIGITAL

IC-F6123D(45W/25W)

128 channels with 8 zones

Ample 128 channel capacity allows most companies plenty of room to grow. Up to 8 zones lets you group together channels in logical fashion.

Built military rugged!

The tough aluminum die-cast chassis and polycarbonate front panel have been tested to the MIL standard 810 F.

Compact hand microphone

Select from 5 levels of mic gain, for clearer transmission.

GPS receiver connection

With optional D-SUB 25-pin ACC cable OPC-2078, an external GPS receiver or PC can be connected.

Note:No Digital Modulation "IN" using accessory cables.

8-character LCD

An 8-character alphanumeric LCD with user-friendly icons shows a variety of information and operating status such as caller's name, received message, etc.

Large programmable buttons

For easy access to often used functions, P0-P3 buttons are programmable to meet specific needs. Buttons and LCD display are backlit for night time opeartion.

Powerful, front-facing speaker

4 watts (typ.) front facing speaker delivers clear and loud audio throughout a vehicle's cabin. Digital modulation adds distinct clarity to received voices.

IDAS™ digital mode operation

The IC-F5123D series provides NXDN™ CAI-based IDAS digital mode operation. It is also compatible with IDAS multi-site conventional and IDAS single-site trunking. The following IDAS features are programmable.

  • PTT ID
  • Individual/Talkgroup list (Max. 500)
  • RAN (Radio Access Number)
  • Status
  • SDM (Short Data Message)
  • Call alert
  • Radio check (RX)
  • Stun/kill/revive (RX)
  • Remote monitor (RX)
  • Emergency (No ACK)
  • Digital voice scrambler
  • GPS data (PC and software required to show received position data)

Built-in 2-Tone and 5-Tone (Analog mode)

2-Tone and 5-Tone signalings give you selective calling, quiet stand-by and other convenient functions with programming. The stun/kill functions disable a radio over the air and the revive function restores the stunned radio.

MDC 1200 compatible (Analog mode)

The following MDC features are available with the built-in MDC signaling.

  • PTT ID
  • Radio check (RX)
  • Emergency (No ACK)
  • Stun/Revive (RX)
  • 500 alias table (Max.)

Scan features

The priority scan allows you to monitor one or two priority channels while scanning other non-priority channels. The TX channel and talk back functions allow you to make a quick response while scanning.

Lone worker function

When the radio is not operated for a preset period, a warning beep will sound, alerting the radio user to check in. If the radio user does not check in before the preset time runs out, then the radio automatically sends out an emergency signal.

Optional Active Noise Canceling Microphone

The optional active noise canceling microphone HM-211 can automatically reduce noise in extremely noisy environments and assist in transmitting clear and accurate audio.


Watch the HM-211 performance video:

Other features

  • CTCSS/DTCS encoder/decoder*
  • BIIS PTT ID transmission*
  • 8 DTMF autodial memories
  • Microphone hanger action programmable
  • Optional DTMF microphone (HM-152T)
  • PC programmable
  • Power-on password function
  • Time out timer
  • Talk around function
  • Nuisance delete function*
  • Forced narrow function*

* analog only

TX: Transmit, RX: Receive

General

IC-F5123D

IC-F6123D

Frequency coverage

136-174MHz

350-400MHz
400-470MHz
450-512MHz

Number of channels

128 channels (8 zones)

Channel spacing

6.25/12.5/25kHz

Type of emission

16K0F3E, 8K50F3E, 4K00F1E/F1D

Current drain
(approx.)
Tx 50W/45W

10A

11A

25W

5A

Rx Stand-by

300mA

Max. audio

1.2A

Dimensions
(projections not included;
W×H×D)
50W/45W version

150×40×167.5 mm;
5.91×1.57×6.59 in

25W version

150×40×117.5 mm;
5.91×1.57×4.63 in

Weight 50W/45W version

1.1kg; 2.4lb

25W version

0.8kg; 1.8lb

Transmitter

IC-F5123D

IC-F6123D

RF output power 50W/45W version

50W, 25W, 5W
(Hi, L2, L1)

45W, 25W, 5W
(Hi, L2, L1)

25W version

25W, 10W, 2.5W
(Hi, L2, L1)

25W, 10W, 2.5W
(Hi, L2, L1)

Spurious emissions

70dB (min.)

Frequency stability

±1.0ppm

Audio harmonic distortion

3% typical
40% deviation

FM Hum and Noise

46/40dB typ. (Wide/Narrow)

Receiver

IC-F5123D

IC-F6123D

Sensitivity

0.25μV typ. (at 12dB SINAD)
0.18μV typ. (at 5% BER)

Adjacent channel selectivity

80/70dB typ. (W/N),
65dB typ. (digital)

75/65dB typ. (W/N),
60dB typ. (digital)

Spurious response rejection

70dB min.

Intermodulation rejection

75dB typ. (W/N),
70dBμV emf type. (digital)

AF output power
(at 5% distortion with an 4Ω load)

4W (typ.)

Applicable U.S. Military Specifications

Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.

Standard MIL-810 F
Method, Proc.
Low Pressure Storage

500.4 I

Low Pressure Operation

500.4 II

High Temperature Storage

501.4 I

High Temperature Operation

501.4 II

Low Temperature Storage

502.4 I

Low Temperature Operation

502.4 II

Temperature Shock

503.4 I

Solar Radiation

505.4 I

Humidity Induced

507.4

Settling Dust

510.4 III

Vibration

514.5 I

Shock Functional

516.5 I

Shock Transit Drop

516.5 IV


Also meets equivalent MIL STD 810 -C, -D and -E.
All stated specifications are subject to change without notice or obligation.

Supplied Accessories

  • Microphone, HM-152
  • Microphone hanger and its cable
  • Mounting bracket kit
  • DC power cable
  • Function name sticker

Catalogs / Brochures

Brochures Name Size
IDAS™ Solutions 2.43MB

Instruction Manual / Guides

Name Model Name Note
Instruction Manual IC-F5120D series, IC-F6120D series
Operating Guide IC-F51210D/F6120D series (MDC / IDAS operation)
INSTRUCTIONS IC-F5123D/IC-F6123D