General
IC-F5062D |
IC- F6062D |
|||
|---|---|---|---|---|
| Frequency coverage (Varies according to version) |
136–174 MHz |
400-470 MHz |
||
| Number of channels |
512 ch/128 zones |
|||
| Channel spacing (Varies according to version) |
25/20/12.5/6.25kHz |
|||
| Type of emission |
16K0F3E, 14K0F3E, 8K50F3E, |
|||
| Current drain | Tx High |
7A |
||
| Rx | Stand-by |
300mA |
||
| Max. audio |
1.2A |
|||
| Dimensions (projections not included; W×H×D) |
160×45×150 mm |
|||
| Weight (approx.) |
1.3kg |
|||
Transmitter
IC-F5062D |
IC- F6062D |
|
|---|---|---|
| RF output power (High) |
25W |
|
| Spurious emissions |
0.25μW (≦1GHz) |
|
| Frequency stability |
±1.5kHz |
|
| Audio harmonic distortion |
3% typical |
|
| FSK error |
5% Max. |
|
Receiver
IC-F5062D |
IC- F6062D |
||
|---|---|---|---|
| Sensitivity | at 20dB SINAD |
–4dBμV emf (typ.) |
|
| at 5% BER |
-8dBμV emf (typ.) |
||
| Adjacent channel selectivity (W/M/N) |
85/83/75dB (typ.) |
||
| Spurious response rejection |
90dB (typ.) |
||
| Intermodulation rejection |
70dB (typ.) |
||
| AF output power (at 5% distortion with a 4Ω load) |
4W (typ.) |
||
Function Comparison and Internal Unit Options
IC-F5062D
|
IC-F5062D
|
||
|---|---|---|---|
| Number of option slots | 1 | 1 | |
| CTCSS/ DTCS | encoder | Available | Available |
| decoder | Available | Available | |
| 2-Tone | encoder | Available | Available |
| decoder | Available | Available | |
| 5-Tone | encoder | Available | Available |
| decoder | Available | Available | |
| DTMF autodial | Available | Available | |
| DTMF decoder | Available | Available | |
| Voice Scrambler | Inversion | Available | Available |
| Non-rolling | UT-109R | UT-109R | |
| Rolling | UT-110R | UT-110R | |
| IDAS dPMR | Tier 2 Mode1/2 | Available | - |
| Tier 2 Mode 3 | Planned | - | |
| IDAS NXDN | Conventional | - | Available |
| Single-site type D trunking |
- | Available | |
| Multi-site type D trunking |
- | Available | |
| MPT 1327 | - | - | |
| BllS 1200 | Available | Available | |
| MDC 1200 | - | Available | |
| LTR™ trunking | - | Available | |
Applicable U.S. Military Specifications
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
| Standard | MIL-810 F Method, Proc. |
|---|---|
| High Temperature Storage |
501.4 I |
| High Temperature Operation |
501.4 II |
| Low Temperature Storage |
502.4 I |
| Low Temperature Operation |
502.4 II |
| Temperature Shock |
503.4 I |
| Rain Blowing |
506.4 I* |
| Rain Drip |
506.4 III* |
| Humidity Induced |
507.4 |
| Vibration |
514.5 I |
| Shock Functional |
516.5 I |
| Shock Transit Drop |
516.5 IV |
* Rain blowing and drip tests were performed on the controller and RMK-3 only.
Also meets equivalent MIL STD 810 -C, -D and -E.
All stated specifications are subject to change without notice or obligation.
Supplied Accessories
- Microphone, HM-152
- Microphone hanger and its cable
- Mounting bracket kit
- DC power cable
- Function name sticker
Close