5W output power (CB). Approved for 25W when using licensed private/commercial frequencies within 450-520MHz*
*ACMA Licensed users only
80 Channel UHF CB* plus up to 35 Private Channels.**
*80 Channel UHF CB, 61-63 not present, reserved for future use.
**Must be enabled using CS-410PRO software.
This feature allows clear communication by reducing the surrounding noise, especially the unwanted low frequency noise received by the microphone.
The Compact and Rugged construction makes this product ideal for use in
Commercial environments.
IC-410PRO |
|||
|---|---|---|---|
| Frequency coverage |
476.4250 - 477.4125 MHz (CB) 450.0000 - 520.0000 MHz (LMR) |
||
| Number of channels |
128 Ch |
||
| Type of emission |
CB : 8K50F3E (12.5 kHz) LMR: 8K50F3E (12.5 kHz) / 16K0F3E (25 kHz) |
||
| Antenna impedance | 50 Ω nominal | ||
| Operating temperature range | - 30℃ to +60℃ | ||
| Power supply voltage | 13.8 V DC | ||
| Current drain (approx.) |
Tx | 25 W |
7.0 A |
| 5 W | 4.0 A | ||
| Rx | Max. audio |
1200 mA |
|
| Stand-by |
300 mA |
||
| Dimensions (projections not included; W×H×D) |
150×40×117.5 mm |
||
| Weight (approx.) |
0.8kg |
||
IC-410PRO |
|
|---|---|
| RF output power |
5W / 1W (CB) 25 / 5W / 1W (LMR) |
| Modulation |
Variable reactancne frequency modulation |
| Maximum permissible deviation |
±2.5 kHz (Narrow) ±5.0 kHz (Wide) |
| Frequency error |
±2.50 ppm |
IC-410PRO |
|
|---|---|
| Sensitivity at 12dB SINAD |
0.25 μV typ. |
| Audio output power |
4.0 W typ. at 5 % distortion with 4 Ω load |
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
| Standard | MIL-810 F Method, Proc. |
|---|---|
| Low Pressure Storage |
500.4 I |
| Low Pressure Operation |
500.4 II |
| High Temperature Storage |
501.4 I |
| High Temperature Operation |
501.4 II |
| Low Temperature Storage |
502.4 I |
| Low Temperature Operation |
502.4 II |
| Temperature Shock |
503.4 I |
| Solar Radiation |
505.4 I |
| Humidity Induced |
507.4 |
| Settling Dust |
510.4 III |
| Vibration |
514.5 I |
| Shock Functional | 516.5 I |
| Shock Transit Drop |
516.5 IV |
Also meets equivalent MIL STD 810 -C, -D and -E.
All stated specifications are subject to change without notice or obligation.
| Name | Model Name | Note |
|---|---|---|
| Basic Manual | IC-410PRO | |
| Advanced Manual | IC-410PRO |
CloseWe use cookies to improve your online experience of this website.
You can click the "Agree" button to accept our policy, then this message does not appear in the future.
Full details are in our Privacy Policy, Acceptable Use Policy, and Terms of Use.
