IEEE 802.11ac (Wave 2) Standard, High-Speed Communication
The AP-95M complies with the IEEE802.11ac (Wave 2) standard providing high-speed and stable data communication at a maximum of 867 Mbps (theoretical value).
Beam Forming Function, MU-MIMO Function
The Beam Forming function can send a signal to a specific direction, and the MU-MIMO function*1 prevents mutual interference. These functions can improve the communication quality.
*1 2×2 MIMO
Virtual AP Function
Up to eight wireless LAN terminal groups can be configured, which can have different VLAN IDs in each 5 GHz and 2.4 GHz band*2.Each virtual AP can have different security settings.
*2 Different SSIDs must be set in the same unit.
Automatic Settings Enables Easy Management
The Automatic Power Level Adjustment function and Connecting Terminal Limit function can remove interference, and they can prevent reduction in communication speed caused by access concentration. The AP-95M can automatically set the channel according to the surrounding signal conditions.
Easy PC Configuration
By using your PC's web browser, you can update to new firmware, and configure the access point. The AP-95M is compatible with SNMP and the RS-AP3 access point management tool so that you can easily manage your terminals.Other Features
Other Features
- Protection function
- Authentication function (IEEE802.1X/WPA/WPA2)
- PoE function
- Stealth function (Hide SSID function)
- Gigabit Ethernet (1000BASE-T)
- Router function
- Web Authentication function
- Network Monitoring function
- Packet Filter function
- Security Slot*3 and more
*3 Attach a security wire (user supplied).
General
| Power supply | PoE (IEEE 802.3af standard: Max. 9 W) 12 V ±10% DC, More than 2 A*1 |
|---|---|
| Usable conditions | −10°C to ＋55°C; +14°F to +131°F (Below 0°C; 32°F: Usable when the power is ON) Humidity 5 to 95% (At no condensation) |
| Dimensions (W)×(D)×(H）(Approximately) | 162×162×42 mm; 6.4×6.4×1.7 in （Projections not included） |
| Weight (Approximately) |
520 g; 1.1 lb (Accessories not included) |
*1 With an AC adapter. An AC adapter may not be supplied, depending on the version.
Wireless LAN
| Security standards | WEP (64/128/152 bit), WPA, WPA2, WPA-PSK, WPA2-PSK, IEEE 802.1X/EAP |
|---|---|
| Number ofchannels*2 | 20 MHz bandwidth 2.4 GHz: 13 channels, 5 GHz: 9 channels 40 MHz bandwidth 2.4 GHz: 9 channels, 5 GHz: 4 channels 80 MHz bandwidth 5 GHz: 2 channels |
*2 Usable channels depend on the country.
Interface
| Cable LAN | 10BASE-T/100BASE-TX/1000BASE-T compatible RJ-45 type connector (MDI/MDI-X automatic distinction) × 1 |
|---|---|
| Wireless LAN | IEEE 802.11 ac/n/a/g/b standard |
| Data rates | Cable LAN : 10/100/1000 Mbps Wireless LAN : 11/54/400*3/867 Mbps |
*3 When connecting with a terminal compatible with 256-QAM.
All stated specifications are subject to change without notice or obligation.
Supplied Accessory
- AC adapter*
- Mounting bracket set
* May not be supplied, depending on the version.
Catalogs / Brochures
| Brochures Name | Size |
|---|---|
| AP-95M | 93KB |
| Marine Products | 6.48MB |
Instruction Manual / Guides
| Name | Model Name | Note |
|---|---|---|
| INSTRUCTION MANUAL | AP-95M | |
| CONNECTION GUIDE | AP-95M | |
| PRECAUTIONS | AP-95M | |
| Setting the Time Zone and Country | AP-95M | |
| PRECAUTION(French) | AP-95M |
Firmware / Software
| Type | Model Name | Version | Last Update |
|---|---|---|---|
| Firmware | AP-95M | Version 2.24 | Nov.16.2021 |
Close