• Repeater properties show condition summary, system information, interface (traffic statistics), repeater condition details (TX/RX PLL unlock, power supply voltage, internal temperature and fan status) and ping status of each repeater
  • Registration log, communication log, traffic log and search log can be filtered by date, user ID, call type and site code*
  • E-mail alert notification can be sent to the administrator, if an alarm or disconnect occurs or clears
  • The “Mesh ping status” shows the connectivity by sending ping commands in all combinations of repeater sites
  • The “Version list” shows the repeaters firmware revision listThe “Map window” shows repeater site icons laid out on a image file such as a map or network diagram
  • USB flash drive containing the software and for the hardware key protection
  • SR-VPN1 VPN router can be monitored on the RS-MGR1 by syslog

* Filter items differ from log types


System Requirements

Operating system Windows Vista® SP2 or later
Windows® 7 SP1 or later,
Windows® 8 (Except Windows RT),
Windows Server® 2003 SP2 or later,
Windows Server® 2008 SP2 or later,
Windows Server® 2008 R2 SP1 or later,
Windows Server® 2012
Memory 2GB or higher
Hard disk space 500GB of minimum disk space
20MB × Number of repeaters × Days for saving logs + 100GB recommended
Display resolution 1280×1024 Pixel or more recommended

100Mbps or faster (Fixed IP address required)


USB 2.0 port, sound card and speaker
UC-FR5000 MCU revision 4.00 or later

All stated specifications are subject to change without notice or obligation.