Descriptions
Wide frequency coverage with 1 kW output*
All HF bands plus the 50 MHz band are covered. The IC-PW1/ EURO provides a stable, clean and low distortion 1 kW from 1.8 MHz to 50 MHz*. In addition, full duty cycle (even during more demanding RTTY or SSTV operation) and full break-in operation are possible. Great for DX’peditions or contest operation.
*Guaranteed within amateur bands only.
Wide ALC adjustable range
Internal circuitry allows the ALC to be adjusted over a wide range. This means that the IC-PW1/EURO can be used with almost any HF, 6 m or HF/6 m rigs–not only Icom rigs*!
*Ask your dealer about usable exciters.
Compact body
Dimensions, including amplifier, power supply, tuner and controller, are only 350(W) × 269(H) × 378(D) mm*. And, because the controller is detachable, the IC-PW1/EURO can be installed almost anywhere in your shack.
*13.8(W) × 10.6(H) × 14.9(D) in.
Other outstanding features…
- Output antennas are selectable from exciters (Icom transceivers only), even when the power of the IC-PW1/EURO is off
- Automatic AC input voltage selector is employed
- Current (lD), Voltage (VD), temperature, SWR and output power protectors are available
- Automatic antenna tuner built-in
Specifications
General
Frequency coverage (MHz) | 1.800– 1.999 3.500– 3.999 7.000– 7.300 10.100– 10.150 14.000– 14.350 18.068– 18.168 21.000– 21.450 24.890– 24.990* 28.000– 29.700* 50.000– 54.000 * The U.S.A. version can only be used the antenna tuner on the 24–28 MHz bands. |
---|---|
Power supply requirements | 180–264 V AC or 90–132 V AC (single-phase; 50/60 Hz) |
Current drain | Less than 15 A (max. output at 200 V) Less than 20 A (max. output at 100 V) |
Usable temperature range | –10°C to +40°C; +14°F to +104°F |
Duty cycle | Full duty |
Input connector | SO-239 × 2 (50 Ω) |
Output connector | SO-239 × 4 (50 Ω) |
Linear Amplifier
Output power |
CW, RTTY: 1 kW (180–264 V AC), 500 W (90–132 V AC) SSB: 1 kW PEP (180–264 V AC), 500 W PEP(90–132 V AC) |
---|---|
Driving power | Max. 100 W |
Spurious emissions | Less than –60 dB (HF bands) Less than –70 dB (50 MHz) |
Antenna Tuner
Output matching range (tuner switch ON) |
16.7 Ω to 150 Ω (HF bands) 20.0 Ω to 125 Ω (50 MHz) |
---|---|
Auto tuning accuracy | VSWR 1.5:1 or less |
Min. required input power | 60 W |
Insertion loss | Less than 1 dB (after tuning) |
All stated specifications are subject to change without notice or obligation.
Supplied Accessories
- Controller separation cable
- ACC cables
- Coaxial cable with PL-259 plugs
Base Stations
POWER AMPLIFIER
- IC-PW1
- 1 kW LINEAR AMPLIFIER
- OPC-599
- ADAPTER CABLE
Instruction Manual / Guides
Name | Model Name | Note |
---|---|---|
INSTRUCTION MANUAL | IC-PW1/PW1EURO |