|
General |
|
Frequency range (Tx/Rx) |
118.000–136.992MHz |
|
Channel spacing
|
25kHz/8.33kHz |
|
Type of emission |
A3E (AM) |
|
Number of memory channels |
200 channels |
|
Antenna connector |
SO-239 (50Ω) |
|
Power supply requirement
|
13.75V/27.5V DC
|
|
Current drain (at 13.75 V DC)
Transmitting
Receiving
|
5.0A (maximum)
4.0A (at AF max.), 0.5A (at stand-by)
|
|
Operating temperature range |
-30°C to +60°C;
|
|
Frequency stability |
±5ppm (–30˚C to +60˚C) |
|
Dimensions
(W×H×D,
Projections not included)
|
161×45×193 (mm);
6.34×1.77×7.6 (in) (approximately)
|
|
Weight (approx.) |
1.5kg; 3.3lb |
|
Transmitter |
Output power (at 13.75V)
(Carrier Power) |
9.0W typ. |
|
Modulation |
70% to 100% |
Spurious emissions
(* Harmonics/Non-harmonics,
30MHz–1GHz) |
Less than -60dBc |
|
Microphone impedance |
600Ω |
|
Receiver |
|
Intermediate freq. |
38.85MHz/450kHz (1st/2nd) |
|
Sensitivity (pd) |
1 μV (6dB S/N) |
|
Selectivity
8.33kHz
25kHz
|
2.778/7.37kHz (6dB/60dB)
8/25kHz (6dB/60dB)
|
|
Spurious response |
More than 74dBμ |
|
Audio output power
Internal SP (8Ω load)
External SP (8Ω load)
Headphone (500Ω load)
|
10% distortion, 60% modulation)
1.5W typical
More than 10W
More than 100mW
|
Measurements made in accordance with FCC Part 87 for
USA version or EN 300 676-1 for Europe version. All stated
specifications are subject to change without notice or obligation.
Applicable U.S. Military Specifications
Icom makes rugged products that meet MIL-STD requirements and strict
environmental standards as follows:
|
Standard |
MIL 810G |
|
Low Pressure
|
500.5 |
I, II
|
|
High Temp.
|
501.5 |
I, II
|
|
Low Temp.
|
502.5 |
I, II
|
|
Temp. Shock
|
503.5 |
I-C |
|
Solar Radiation
|
505.5 |
I |
|
Humidity |
507.5 |
II |
|
Vibration |
514.6 |
I |
|
Shock |
516.6 |
I |
Also meets equivalent MIL-STD-810-C, -D, -E and -F.
Applicable IP Rating
| Ingress Protection Standard |
|
Dust & Water
|
IP54 (Dust-protection and water resistance)
|
Supplied Accessories
- Hand microphone, HM-216
- DC power cable
- Microphone hanger kit
- Mounting bracket kit
- Fuses