English | Español | Português
Icom America Home

IC-F50V / F60V

VHF / UHF transceiver

specifications

Specifications

General
Frequency range
IC-F50V
136-174 MHz
IC-F60V
400-470 MHz
450-512 MHz (U.S.A.)
450-520 MHz (General)
Number of Channels Max. 128 channels/ 8 zones
Channel spacing 12.5/25 kHz, 15/30 kHz
Antenna impedance 50 Ω (SMA Type)
Frequency error ±2.5ppm
PLL channel step 2.5/3.125 kHz
Power supply requirements 7.2V DC

Current drain (approx.)
Transmit
 
Receive

 
5W
1W
AF max.
 
Stand-by
1.8A
0.7A
500mA (Internal speaker)
350mA (External Speaker)
85mA
Operating temperature range –30°C to +60°C
–22°F to +140°F
Dimensions (W x H x D)
(projections not included)
56 × 97 × 36.4mm
2732 × 31316 × 1716 in.
Weight (approx.) VHF: 280g; 9.9oz (With BP-227)
UHF: 284g; 10.0oz (With BP-227)
Transmitter
Output power
IC-F50V
IC-F60V

5.0W
4.0W
Modulation system Variable reactance frequency modulation
Max. frequency deviation ±5 kHz (wide)
±2.5 kHz (narrow)
Modulation limiting 60-100% of Max. deviation
Audio harmonic distortion 3% typ. (AF 1 kHz, 40% deviation)
Spurious emissions 70dB typ.
Adjacent channel power 70dB Min. (wide)
60dB Min. (narrow)
FM Hum and Noise 46dB typ. (wide)
40dB typ. (narrow)
External microphone impedance 9-pin multi connector/2.2kΩ
Receiver
Sensitivity 0.25µV typ. (at 12db SINAD)
Squelch sensitivity 0.25µV typ. (at threshold)
Adjacent channel selectivity 75dB typ. (wide)
65dB typ. (narrow)
Spurious response 70dB
Intermodulation 74dB typ.
Hum and noise 45db typ. (wide)
40dB typ. (narrow)
Audio output power 0.7W typ. (Internal speaker)
0.5W typ. (external speaker)
at 5% distortion with an 8Ω load
External SP connector 9-pin multi connector/8Ω

Applicable U.S. Military Specifications

Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and Ingress Protection standards.

Standard MIL 810 C MIL 810 D MIL 810 E MIL 810 F
Method Proc Method Proc Method Proc Method Proc
Low Pressure 500.1 I 500.2 I, II 500.3 I, II 500.4 I, II
High Temp. 501.1 I 501.2 I, II 501.3 I, II 501.4 I, II
Low Temp. 502.1 I 502.2 I, II 502.3 I, II 502.4 I, II
Temp. Shock 503.1 I 503.2 I 503.3 I 503.4 I
Solar Radiation 505.1 I 505.2 I 505.3 I 505.4 I
Rain 506.1 I, II 506.2 I, II 506.3 I, II 506.4 I, II
Humidity 507.1 I, II 507.2 II, III 507.3 II, III 507.4
Salt Fog 509.1 I 509.2 I 509.3 I 509.4
Dust 510.1 I 510.2 I 510.3 I 510.4 I
Vibration 514.2 VIII, X 514.3 I 514.4 I 514.5 I
Shock 516.2 I, II, V 516.3 I, IV 516.4 I, IV 516.5 I, IV
Ingress Protection Standard
Dust & Water IP67 (Dust-tight and waterproof protection)

Measurements made in accordance with EIA-152C/204D, TIA-603. All stated specifications are subject to change without notice or obligation.

Supplied Accessories

  • Antenna (Length may differ according to version)
  • Alligator-type belt clip, MB-98
  • Battery pack, BP-227