English | Español | Português
Icom America - 2 way radios

F3210D / F4210D

Entry Level IDAS™ Trunking Portables VHF/UHF




Frequency coverage

IC-F3210D  136-174 MHz

IC-F3210D   400-470 MHz 450-512 MHz

Number of channels 16 channels
Type of emission 16K0F3E* / 11K0F3E/8K50F3E / 4K00F1E / F1D
Channel spacing 25* / 15 / 12.5 / 6.25 kHz
Power supply requirement 7.5V DC nominal
Current drain
  Tx High (VHF)
  Rx Max. audio
400mA (internal SP)
90mA (digital mode)
400mA (internal SP)
100mA (digital mode)
Antenna impedance 5OΩ
Operating temperature range
-30°C to +60°C; -22°F to +140°F (radio only)
Dimensions (proj. not included) 58(cW) × 111.5(H) × 36.5(D) mm; 2.28×4.39×1.44in (with BP-265)
Weight 320g; 11.3oz (With MB-124, BP-265 & antenna)
Output power (at 7.5V DC) F3210D: 5W, 2W, 1W (hi, L2, L1)
F4210D: 4W, 2W, 1W (Hi, L2, L1)
Max. frequency deviation ±5.0 kHz (wide)
±2.5 kHz (narrow)
Frequency stability
Spurious emissions F3210D: 75/71dB typ. (W/N)
F4210D: 75dB typ.
FM Hum and noise F3210D: 52/46dB typ. (W/N)
F4210D: 50/44dB typ. (W/N)
Audio harmonic distortion
0.5/0.8% typ. (AF 1kHz 40% deviation, W/N)
FSK Error
2% typ.
External microphone connector 3-conductor 2.5 (d) mm (110")⁄2.2Ω
(at 12dB SINAD)
(at 5% BER)
0.23μV typ.
0.18μV typ.
0.22μV typ.
0.18μV typ.
Adjacent channel selectivity F3210D: 77/71dB typ. (W/N/D)
F4210D: 74/67/58dB typ. (W/N/D)
Spurious response rejection F3210D: 91dB typ.
F4210D: 80dB typ.
Intermodulation rejection 75/75/70dB typ. (W/N/D)
Hum and noise 48/42dB typ. (W/N)
Audio output power (at 5% distortion)
Internal SP (with 12Ω load)
External SP (With 8Ω load)
800mW typ. (Internal SP, 12Ω load)
400mW typ. (External SP, 8Ω load)
External speaker connector 2-conductor 3.5 (d) mm (18")⁄8Ω

Measurements made in accordance with EAIA-152-C/204D or TIA-603.

Applicable U.S. Military Specifications and IP Rating

Standard MIL 810 F
Method Proc
Low Pressure 500.5 I, II
High Temp. 501.5 I, II
Low Temp. 502.5 I, II
Temp. Shock 503.5 I-C
Solar Radiation 505.5 I
Rain 506.5 I, III
Humidity 507.5 II
Salt Fog 509.5
Dust Blowing 510.5 I
Vibration 514.6 I
Shock 516.6 I, IV

Also meets equivalent MIL-STD-810-C, -D -E and -F.
Ingress Protection Standard (IC-F3210D, F4210D with BP-265)
  Dust and water – IP54 (dust-protection and water resistant)

All stated specifications are subject to change without notice or obligation.


View our blog