English | Español | Português
Icom America Home

IC-F3101D / F4101D Series

VHF and UHF Digital / Analog Transceivers

specifications

Specifications

General

Frequency coverage

IC-F3101D  136-174 MHz

IC-F4101D   400-470 MHz 450-512 MHz

Number of channels 16 channels
Type of emission F3101D: 16k0F3E, 11K0F3E, 4K00F1E/F1D
F4101D: 11K0F3E, 4K00F1E/F1D
Channel spacing F3101D: 6.25/15/30kHz, 6.25/12.5/25kHz
F4101D: 6.25/15/30kHz, 6.25/12.5kHz
PLL channel step 2.5 kHz, 3.125 kHz (VHF)
Power supply requirement 7.5V DC nominal
Antenna impedance 5OΩ
Operating temperature range
-30°C to +60°C; -22°F to +140°F (radio only)
Current drain
  Tx High (VHF)
  Rx Max. audio
       Standby
F3101D
1.3A
400mA (internal SP)
90mA (digital mode)
F4101D
1.3A
400mA (internal SP)
100mA (digital mode)
Dimensions (proj. not included) 58(W) × 111.5(H) × 36.5(D) mm; 2.28×4.39×1.44in (with BP-265)
Weight F3101D: 150g; 5.3o (radio only) 320g; 11.30z (with MB-124, BP-265 and Ant.)
F4101D: 150g; 5.3oz (radio only)310g; 10.9 oz (with MB-124, BP-265 and Ant.)
Transmitter
Output power (at 7.5V DC) F3101D: 5W, 2W, 1W (hi, L2, L1)
F4101D: 4W, 2W, 1W (Hi, L2, L1)
Max. frequency deviation ±5.0 kHz (wide)
±2.5 kHz (narrow)
Frequency stability
±1.0ppm
Spurious emissions 70dB min.
FM Hum and noise F3101D: 52/46dB typ. (W/N)
F4101D: 50/43dB typ. (W/N)
Audio harmonic distortion
(AF 1kHz 40% deviation)
F3101D 
F4101D  
0.5/0.8% typ. (W/N)
0.7/1.2% typ. (W/N)
External microphone connector 3-conductor 2.5 (d) mm (110")⁄2.2Ω
Receiver
Sensitivity
(at 12dB SINAD)
(at 5% BER)
F3101D
0.23μV typ.
0.18μV typ.
F4101D
0.22μV typ.
0.18μV typ.
Adjacent channel selectivity F3101D: 77/71dB typ. (W/N)
F4101D: 74/67dB typ. (W/N)
Spurious response rejection F3101D: 90dB typ.
F4101D: 80dB typ.
Intermodulation rejection 75dB typ.
Hum and noise F3101D: 48/42dB typ. (W/N)
F4101D: 46/40dB typ. (W/N)
Audio output power (at 5% distortion)
Internal SP (with 12Ω load)
External SP (With 8Ω load)
800mW typ.
400mW typ.
External speaker connector 2-conductor 3.5 (d) mm (18")⁄8Ω

Measurements made in accordance with EAIA-152-C/204D or TIA-603.

Applicable U.S. Military Specifications and IP Rating

Standard MIL 810 F
Method Proc
Low Pressure 500.4 I, II
High Temp. 501.4 I, II
Low Temp. 502.4 I, II
Temp. Shock 503.4 I
Solar Radiation 505.4 I
Rain 506.4 I, III
Humidity 507.4
Salt Fog 509.4
Dust Blowing 510.4 I
Vibration 514.5 I
Shock 516.5 I, V

Also meets equivalent MIL-STD-810-C, -D and -E.
Ingress Protection Standard: Dust and water – IP54 (dust-protection and water resistant)

All stated specifications are subject to change without notice or obligation.