English | Español | Português
Icom America Home

IC-7200

HF/50MHz Transceiver

specifications

Specifications

General

Frequency coverage*1
U.S.A. Version
RX
TX
 
 
 
 
0.030– 60.000 MHz*2
1.800– 1.999 MHz
3.500– 3.999 MHz
5.3305, 5.3465, 5.3665, 5.3715, 5.4035 MHz*3
7.000– 7.300 MHz
10.100–10.150 MHz
14.000– 14.350 MHz
18.068–18.168 MHz
21.000– 21.450 MHz
24.890–24.990 MHz
28.000– 29.700 MHz
50.000–54.000 MHz
*1 Frequency ranges vary depending on version.
*2 Guaranteed range: 0.5–29.7 and 50–54.000 MHz..
*3 USB only
Mode USB, LSB, CW, RTTY (FSK), AM
Number of channels 201 Ch. (199 regular, 2 scan edges)
Antenna connector SO-239 (50Ω)
Power supply requirement: 13.8V DC ±15% (negative ground)
Operating Temperature range -10°C to +60°C; +14°F to +140°F
Frequency stability

Less than ±0.5ppm

Frequency resolution 1Hz
Power consumption Tx Max. power: 22.0A
Max. audio: 2.0A
Rx Stand-by: 1.3A
Dimensions
(projections not included)
241 (W) × 84 (H) × 281 (D) mm;
9 12 x 3 516 x 11 116 in.
Weight (approx.) 5.5kg; 12.1 lb

Transmitter

Output power
SSB, CW, RTTY
AM

2–100W
1-25W*
*Carrier power.
Modulation system
SSB
AM
 
Digital PSN modulation
Digital low power modulation
Spurious emission
(unwanted emission)
Less than -50dB (HF bands)
Less than -63dB (50 MHz band)
Carrier suppression More than 50dB
Unwanted sideband More than 50dB
Microphone connector 8-pin connector (600Ω)

Receiver

Receive system Triple conversion super-heterodyne
Intermediate frequencies

64.455 MHz
455 MHz
15.625 kHz
Sensitivity (10dB S/N, Preamp ON, Filter shape sharp)
SSB, CW

AM
 
Less than 0.16µV (1.8-29.7 MHz)
Less than 0.13µV (50 MHz band)

Less than 13µV (0.5-1.799 MHz)
Less than 2µV (1.8-29.7 MHz)
Less than 1µV (50 MHz band)
Squelch sensitivity (Pre-amp: ON)
SSB, Threshold
 
Less than 5.6μV
Selectivity
SSB (BW: 2.4kHz sharp)
 
CW (BW: 500Hz sharp)
 
RTTY (BW: 350kHz)
 
AM (BW: 6kHz)
 

More than 2.4 kHz/–6dB
Less than 3.6 kHz/–60dB
More than 500 Hz/–6dB
Less than 900 Hz/–60dB
More than 360 Hz/–6dB
Less than 650 Hz/–60dB
More than 6.0 kHz/–6dB
Less than 15.0 kHz/–60dB
Spurious and image rejection ratio More than 70dB (except 1/2 IF through on 50 MHz band)
Audio output power (at 13.8V DC) More than 2.0W at 10% distortion with an 8Ω load
RIT variable range ±9.999 kHz
EXT SP connector 2-connector 3.5 (d) mm (18″)/8Ω

All stated specifications are subject to change without notice or obligation.