English | Español | Português
Icom America Home

IC-7000

HF/VHF/UHF All Mode Transceiver

specifications

Specifications

General
Frequency Coverage*1
  Receive

  Transmit
 
0.030–199.999 MHz*2
400.000–470.000 MHz*2
1.800– 1.999 MHz
3.500– 3.999 MHz
5.3305, 5.3465, 5.3570, 5.3715, 5.4035 MHz*3
7.000– 7.300 MHz
10.100–10.150 MHz
14.000–14.350 MHz
18.068–18.168 MHz
21.000–21.450 MHz
24.890–24.990 MHz
28.000–29.700 MHz
50.000–54.000 MHz
144.000–148.000 MHz
430.000–450.000 MHz
*1 Showing USA Version. Varies according to version.
*2 Some frequency bands are not guaranteed.
*3 USB only.
Mode USB, LSB, CW, RTTY, AM, FM, WFM (Rx only)
No. of memory channels 503 (495 regular, 6 scan edges and 2 call)
Antenna connector

SO-239×2

(for HF/50 MHz and 144/43/440 MHz bands; 50Ω)

Temperature Range

-10°C to +60°C;

+14°F to +140°F

Frequency stability Less than ±0.5 ppm (+0°C to +50°C; +32°F to +122°F)
Power supply requirement 13.8V DC ±15%
Power consumption
(approx.)
Tx   
Rx
Max. Power   
Standby  
Max. Audio  
22.0A
1.3A
1.6A
Dimensions (W×H×D)
(projections not included)
167(W)×58(H)×180(D) mm;
69/1(6(W)×29/32(H)×73/32(D) in.
Weight (approx.) 2.3kg; 5.1lb
Receiver
Intermediate frequencies
  SSB, CW, RTTY, AM, FM
  WFM
 
124.487 MHz, 455 kHz, 16.15 kHz
134.732 MHz, 10.70 MHz
Sensitivity (Pre-amp: ON)
  0.5-1.8 MHz 1.8-29.9 MHz 50-54 MHz 144/440 MHz
SSB/CW 0.15µV 0.12µV 0.11µV
AM 4.0µV 2.0µV 1.0µV 1.0µV
FM 0.5µV
(28-29.7)
0.25µV 0.18µV
WFM 10.0µV (76-108MHz)
SSB/CW, AM : 10dB S/N, FM, WFM : 12dB SINAD
Squelch sensitivity
  SSB
  FM
(Pre-amp: ON, threshold)
Less than 5.6µV
Less than 0.3µV
Selectivity
  SSB (BW: 2.4kHz, sharp)
 
  CW (BW: 500Hz, sharp)
 
  RTTY (BW: 350Hz)
 
  AM (BW: 6kHz)
 
  FM (BW: 15kHz)
(representative value)
More than 2.4 kHz/–6dB
Less than 3.9 kHz/–60dB
More than 500 Hz/–6dB
Less than 900 Hz/–60dB
More than 360 Hz/–6dB
Less than 650 Hz/–60dB
More than 6.0 kHz/–6dB
Less than 15 kHz/–60dB
More than 12 kHz/–6dB
Less than 20 kHz/–60dB
Spurious and image
rejection ratio
More than 70dB (HF bands)
More than 65dB (other bands)
(except 1/2 IF through on 50MHz, IF through on 144MHz)
AF output power
(at 13.8V DC)
More than 2.0W at 10% distortion with an 8Ω load
EXT SP connector 2-conductor 3.5 (d) mm (1/8″) / 8Ω

All stated specifications are subject to change without notice or obligation.

READ ALL INSTRUCTIONS carefully and completely before using the transceiver.

Supplied Accessories

  • Hand microphone, HM-151
  • DC power cable
  • Spare fuses
  • ACC cable (13-pin)
  • Electronic keyer plug
  • RTTY key plug
  • Microphone hanger